TPS1H100BQPWPRQ1   TI

• Qualified for automotive applications
• AEC-Q100 Qualified with the following results:
– Device temperature grade 1:
–40°C to 125°C ambient operating temperature range
– Device HBM ESD classification level H3A
– Device CDM ESD classification level C4B
• Functional safety capable
– Documentation available to aid functional safety system design
• Single-channel smart high-side power switch with full diagnostics
– Version A: open-drain status output
– Version B: current sense analog output
• Wide operating voltage 3.5 to 40 V
• Very-low standby current, <0.5 µA
• Operating junction temperature,
–40 to 150°C • Input control, 3.3-V and 5-V logic compatible
• High-accuracy current sense, ±30 mA at 1 A, ±4 mA at 5 mA
• Programmable current limit with external resistor, ±20% at 0.5 A
• Diagnostic enable function for multiplexing of mcu analog or digital interface
• Tested according to AECQ100-12 Grade A, 1 million times Short to GND test
• Electrical transient disturbance immunity certification of ISO7637-2 and ISO16750-2
• Protection – Overload and short-circuit protection
– Inductive load negative voltage clamp
– Undervoltage lockout (UVLO) protection
– Thermal shutdown/swing with self recovery
– Loss of GND, loss of supply protection
– Reverse battery protection with external circuitry
• Diagnostic
– On- and Off-state output open- and short-tobattery detection
– Overload and short to ground detection and current limit
– Thermal shutdown/swing detection
• 14-Pin Thermally-enhanced PWP package